* Decanter and disk-stack centrifuges are used for separation of solids and water from trap greases (brown grease, yellow grease, etc.)
* Separation of minor oil & water emulsions is possible.
* No filter media, screens or clothes used.
* No full time operator required.
* Reduces polymer & lime consumption as part of the water treatment process, thereby reducing production costs.
* References are available.
* Potential buyers are available for your purified brown grease & yellow grease regardless of FFA percentage.
Westfalia Separator SA-35-03-076. One (1) machine available. Concentrator design. Centripetal pump (paring disc) discharge of heavy phase liquid, gravity (open cover) discharge of light phase liquid. Gear drive. 30 H.P. 230/460 volt, 3-phase, 60 cycle. All stainless steel product contact areas. Recently reconditioned and never used. Contact us for more details. Three (3) machines available. Warranty offered.
Reconditioned Alfa Laval NX-418 (14" x 57") decanter centrifuge. 3.5 kN-M gearbox. Esjberg-style feed zone. 110 mm (4.25") pitch. Double-row cake discharge. Tungsten carbide tiled wear protection on solids-half of the conveyor. Stainless Steel construction. Motors, controls and oilfield skid can be supplied on request.
Westfalia Separator OSA35-02-076 mineral oil purifier. Excellent for separation of biodiesel / glycerin, water / solids separation for waste vegetable oils, trap grease, diesel fuel, fuel oils, lube oils, etc. 15 HP motor.
Reconditioned Alfa Laval and Westfalia centrifuges and separators for biodiesel separations. These centrifuges are capable of instantaneous and continuous separation of water, solids, glycerin and other contaminants from various feedstocks (WVO, animal fats, vegetable oils, yellow grease, trap grease, brown grease, etc.) and produced biodiesel. Please contact us for a recommendation based on your specific application.
Sharples P-3400 Decanter Centrifuge. Stainless steel product contact areas. Tiled conveyor. 4.25" pitch. Quasi-axial conveyor. Open hole, fully epicentric plate dams. Hogged-out solids discharge ports. 50 HP main-drive motor. 20 HP in-line back-drive motor. Complete with stand and control system featuring an Allen Bradley PLC with ABB variable frequency drives.
Alfa Laval NX-314 decanters available. 14" x 34" bowl dimensions, 8.5 degree beach. 70 mm or 110 mm conveyor pitch. Hard-facing or tiled wear protection on conveyor. 2.5 kN-M gearbox. All stainless steel production contact areas. Can be rebuilt to your specifications. Note attached pictures of typical reconditioned machines offered by Kyte.
Alfa Laval MAPX-205 mineral oil centrifuge.
Sharples-Alfa Laval PM-38000 Decanter Centrifuge.
Westfalia OSA20-02-566. Two (2) available.
Sharples P-3400 decanter centrifuge. Stainless steel product contact parts. 14" x 48" bowl dimensions. 10 degree beach. 4000 RPM max. bowl speed.
(Same as Sharples PM30000)
Reconditioned Sharples P-1000 Decanter Centrifuge. 14" x 22" bowl dimensions. 3250 RPM max. bowl speed. 10 degree beach. Conical bowl. Stainless Steel product contact areas. FOB Amarillo, Texas. Available for inspection. 15 HP main drive motor. 5 HP back drive motor. Available in P-52, 125 or 165 : 1 gear ratios. Control panel with variable frequency drives (VFD), programmable logic controller (PLC) and touch-screen operator interface available.
Two (2) Machines available.
Alfa Laval MAPX-309 disk stack centrifuge. 15 HP motor. Features open cover, gravity discharge of both light and heavy liquid phases. Used for fuel oil, diesel, lube oil, yellow grease, brown grease, biodiesel and waste vegetable oil separations.
Flottweg Z4E-3/451 decanter centrifuge. All stainless steel product contact areas. Bowl diameter: 420 mm. Purchase new in 2009 and never un-crated and put into service. Intended for use in biodiesel service. Max. bowl speed: 4000 RPM. Tungsten carbide tiled wear protection on scroll conveyor. 22 kW main drive motor. 400 volt, 50 cycle. Planetary gear type SP 2.26.
Used Sharples PM-35000 decanter centrifuge. Stainless steel product contact areas. P-125, 125:1 gearbox ratio. With controls and motor.
Two (2) used Alfa Laval BRPX-313-XGD-74 separators available. Last Application: Fish oil, fish stick water. Rated for 12,000 - 18,000 Liters per hour.
Used Alfa Laval FMAPX-309-BGV-14 separator.
Reconditioned Alfa Laval AVNX-935-B-31G (same as NX-4555) Decanter Centrifuge.For dewatering of biological sludge. Capacity: approximately 600 kg/hour. I ex. 20 m3/hour with 3 % dry solids. Drum diameter: 450/258 mm, Max sludge density: 1,2 kg/dm3, max bowl speed: 3250 rpm.
Serial no. 501.7738. Year 1993. Fully reconditioned in 2012. Out of operation since 2008.
Two (2) Alfa Laval GTPX-517 purifier centrifuges.
Bird 12" x 30" decanter centrifuge. Stainless steel contact parts. SA-76, 100:1 ratio gearbox. Hard-faced conveyor. Open-hole, epicentric plate dams. Max. RPM: 3,500. Max. G-force: 2,089 @ 3,500 RPM. 25 HP main-drive motor. 7.5 HP back-drive motor. 460/480 volt, 3-phase, 60 cycle power input required. Motors are pre-wired with all-weather conduit to an all-weather control panel which included variable frequency drive (VFD's) and programmable logic controller (PLC) with LCD touch-screen operator interface.
This machine is available for rental and pilot testing. Average process flow rates are 5 - 15 gallons per minute. Please contact us for rental rates and details.
ALfa Laval SG2-800 decanter centrifuge.
Reconditioned Sharples P-2000 decanter centrifuge. 14" x 22" bowl dimensions. 10 degree beach. 4000 RPM maximum bowl speed. 3180 x G maximum G-force. All stainless steel product contact areas. Available with P-52, 125 or 165 : 1 gear ratios. 20 HP main drive motor. 7.5 HP back drive motor. Control panel with variable frequency drives (VFD), programmable logic controller (PLC) and touch-screen operator interface available.
Reconditioned Sharples P-3000 decanter centrifuge. 14" x 30" bowl dimensions. 10 degree beach. 4000 RPM maximum bowl speed. 3180 x G maximum G-force. All stainless steel product contact areas. Available with P-52, 125 or 165 : 1 gear ratios. 25 or 30 HP main drive motor. 7.5 or 10 HP back drive motor. Control panel with variable frequency drives (VFD), programmable logic controller (PLC) and touch-screen operator interface available.
Sharples PM-35000 (17" x 50") decanter centrifuge. All stainless steel product contact areas. Tiled conveyor. 360 degree discharge. P-125 gearbox (125 : 1 ratio). Fiberglass cover (NOTE: stainless steel cover can be fabricated on request).
Three phase Alfa Laval NX-418 decanter centrifuge. Reconditioning services available. Great for separation of two liquid phases and a solids phase.
Two (2) Sharples P-5000 decanter centrifuges. P-180 gearboxes reported. Stainless steel rotating assemblies. 25" x 66" bowl dimensions. Ideal "big bowl" decanter for oilfield drilling mud. Last used in ethanol DDGS separation.
Sharples SP-6500 "Sludge-Pak" Solid Bowl Basket Centrifuge. 316 stainless steel product contact parts. 48" x 30" bowl dimensions. 30 HP motor. 1400 bowl RPM. 900 x G-force. Top feed, bottom dump design.
Kubco K-618. 6" bowl diameter x 18" bowl length. 10 degree beach angle. Stainless steel product contact areas. 2" double lead conveyor pitch. Radial flow. Hard-surfaced conveyor and solids discharge. K-87 (87 : 1 ratio) cyclo gearbox. 10 HP main drive motor. 5 HP back drive motor. Max. speed: 4800 RPM. Max. G-force: 1963 x G. Maximum hydraulic capacity: 6 GPM.
Last application was used on soybean oil clarification. Machine was operational when removed from service. Customer upgraded to a larger machine for higher capacity production and no longer needs this unit.
Reconditioned Westfalia RSA150-01 self-cleaning disk stack centrifuge. Ideal for vegetable oil refining, degumming, soap stock separation, biodiesel, etc.
Sharples P-5400 (PM70000) decanter centrifuges available in both 2-phase and 3-phase design. 2-phase (liquid/solids) can be converted to a 3-phase (liquid/liquid/solids) design. 25" x 91" bowl dimensions. Max. G-force: 3,000 x G. 316/317 stainless steel product contact areas. P-180, 95/1 gearbox. Supplied with brand-new air-cooled lube system.
Available as reconditioned with brand-new motors and modern, brand-new PLC/VFD control systems. Typical motor size is 150 HP main-drive and 60 HP back-drive.
Sharples P3400 (14" x 48") decanter centrifuge. 10 degree beach. 3,180 x G @ 4,000 RPM. All 316 stainless steel product contact parts. P-52, 125 or 165 gearboxes available.
Alfa Laval NX 934B-11G three-phase (liquid/liquid/solid) decanter centrifuge. Conveyor features STC tiled wear protection. Hydraulic back drive system, electrical cabinet, tools, and manual.
The machine was built in 1996 and has approximately 8,000 - 10,000 running hours since last reconditioning including new tiles.
Please contact us for additional pictures and details.
Reconditioned Westfalia SA-40-03-177 disk stack centrifuge for three-phase separation (light liquid, heavy liquid and solids). Machine features a centripetal pump discharge of the heavy phase liquid and gravity discharge of the light phase liquid. Belt drive design. Special tools, controls and warranty included.
Sharples P-1000 (14" x 22" bowl dimensions) decanter centrifuge available for rental. Ideal for pilot testing. 3250 maximum RPM (bowl speed). 2,200 x G-force. 20 HP main-drive motor. 7.5 HP back-drive motor. 460/480 volt, 3-phase input power required. Controls include ABB VFD's, Allen Bradley PLC, and Maple Leaf touch-screen in an all-weather enclosure.
Call for rental details. Machine is also available for purchase.
Sharples P-3400 Decanter Centrifuge. Max. Bowl Speed: 4000 RPM. Max. G-force: 3,180 x G. 4.25" conveyor pitch spacing. Tungsten carbide tiled wear protection. Hogged out solids discharge with wear inserts. Feed zone with wear inserts. Open-hole, fully-epicentric plate dams. P-125 gearbox (125/1 ratio). Trip-arm with limit switch.
Machine includes stand, 40 HP main-drive motor and VFD control panel.
This machine was fully-reconditioned in 2012 by Kyte Centrifuge and supplied with brand-new controls and motor. It was used periodically over an 18 month period for dewatering of trap grease waste-water. Customer went out of business due to permitting and odor control issues.
Machine is available for rental in as-is condition, or, can be fully reconditioned for purchase.
Westfalia SA45-03-076 3-way liquid/liquid/solid separator featuring centripetal pump (paring disc) discharge of the heavy phase fluid and open-cover gravity discharge of the light phase fluid. Machine includes control panel. No tools reported.
All-stainless steel product contact areas. Can be used for food-grade or non-food grade.
Ideal for using on biodiesel, trap grease, rendered fats, oil/water/solids separation, degumming of vegetable oils, etc.
Used 3-phase Centrisys Decanter for solid/liquid/liquid separation. Model CS21-43. Missing controls and Rotodiff.